Operations online · Santos --:--:-- BRTSC-02.Q
Questions owners and charterers ask us.
What owners, charterers and agents ask before, during and after a call — the company’s general answers and every service line’s, in one place.
- 42
- Answers
- 06
- Services
- Santos · 24/7
- Operations hub
General
01Where does Seachios® operate?
From our operations hub in Santos we serve the main Brazilian ports, from the Amazon to the far south, at berth and at anchor, with local teams and equipment.
02How quickly do you reply and mobilise?
Our operations hub replies 24/7, usually within 30 to 60 minutes, and plans the team, permits and equipment around the vessel’s arrival and schedule.
03How do I request a quote?
Send the vessel, the port, the expected arrival and the work needed through the contact page or by WhatsApp; you receive the method, the timing and the price before the vessel arrives.
04Do you work at anchorage as well as at berth?
Yes. Teams and equipment reach the vessel by launch at the anchorage, so cleaning, inspection and repairs can run during the waiting time without losing the berth.
05What do we receive when the job is done?
Every call closes with a dossier: photos and logs, certificates where applicable, port reception receipts and a record of the scope against the outcome, filed per hold or tank.
06Which standards does Seachios® work to?
Each line works to its own frameworks — MARPOL, SOLAS, ISGOTT, IACS, NORMAM and the cargo standards such as USDA, GAFTA and NAEGA — listed on every service page with the deliverables they require.
Cargo Hold Cleaning
Open the line01How long does cargo hold cleaning take in Brazil?
For a Supramax with five holds, a grain-clean job usually takes two to three days, with robotic units working alongside shore gangs; a hospital clean takes longer. Heavy coal, clinker or poor coatings can extend it, and the plan is always fitted to the time the vessel has in port.
02What does grain clean require, and what does hospital clean add?
Grain clean means holds swept, washed and dried, free of the previous cargo, loose rust, odour and insects, ready for the grain inspector. Hospital clean is the strictest standard, used for cargoes such as wood pulp or alumina: no residue, stain or loose scale may remain.
03Do you clean holds at anchorage or only at berth?
Both. Most jobs are done at anchorage before berthing, so the vessel arrives ready to load; cleaning at berth is possible where the terminal and the port authority allow it.
04Where do the residues and the wash water go?
Solid residues and wash water are delivered to licensed reception facilities in the port, as MARPOL Annex V requires. Nothing is discharged overboard, and the receipts are part of your documents.
05What does no cure, no pay mean in practice?
You are invoiced only when the independent surveyor accepts the holds. If a hold is rejected, our crews clean it again before any charge applies.
06Which ports do your hold cleaning crews cover?
In the main bulk ports, including Santos, Paranaguá, Itaqui, Vila do Conde, Vitória and Rio Grande, with crews and equipment brought to the anchorage by boat. Other ports are quoted on request.
Tank Cleaning
Open the line01When should a ship’s fuel tanks be cleaned?
Before switching between fuel grades, before hot work in or near a tank, when purifiers and filters clog again and again, or when sludge build-up reduces the usable capacity.
02Can you clean VLSFO tanks with wax deposits?
Yes. Where it is safe, the tank is heated above the pour point, solvent boosters compatible with the coating are added and the fixed machines run extra cycles before the hydrojets finish the job.
03How is safety managed inside the tanks?
Every entry follows the permit-to-work, ISGOTT and the Brazilian NR-33 rule: oxygen and hydrocarbon readings, explosion-proof equipment, a watch at the manhole and a rescue team on standby.
04Where does the sludge go?
It is landed to licensed reception facilities in the port. Nothing goes overboard, and the receipts match the Oil Record Book entries.
05What documents do we receive at the end?
A gas-free certificate, the reception receipts, Oil Record Book extracts and an operational report with photos, machine settings and the chemicals used.
06Are cargo tanks cleaned as well?
Selected cargo tanks, such as vegetable-oil tanks, can be cleaned where the coating and the agreed work allow. Send us the tank and cargo details for an answer.
Underwater Services
Open the line01Do Brazilian ports permit in-water hull cleaning?
Yes, with authorisation. NORMAM-401 governs biofouling in Brazilian waters, and each cleaning needs the permission of the port authority and the Harbour Master. We handle the request as part of the job.
02How many days will the hull cleaning need?
It depends on the wetted area, the type and amount of fouling and the conditions in the water. Our underwater planner estimates the days by zone, and even a large, heavily fouled hull is planned to finish within four days.
03Does propeller polishing really save fuel?
A rough propeller wastes power, and polishing restores a smooth surface. The saving depends on the propeller’s condition, so we record the blades before and after and do not promise a fixed figure.
04Can an underwater inspection replace a drydock survey?
Not automatically. Our footage supports the surveyor’s assessment, but any equivalence is decided by the class society or the authority.
05What do the videos and photos show?
Each area — hull, stern, intakes and appendages — is filed separately, with notes limited to what can be seen. Thickness gauging or testing is included only when contracted.
06Which ports do your divers cover?
More than thirty service points along the coast and on the Amazon, among them Santos, Paranaguá, Rio de Janeiro, Vitória, Salvador, Suape, Pecém and Itaqui. Support in Argentina, Uruguay, Chile and Panama can be arranged.
Anchor and Chain Services
Open the line01When must an anchor chain be renewed?
Under IACS rules a link is renewed when its mean diameter has worn by more than 12% of the nominal size, or sooner if it is cracked, deformed or has a loose stud.
02Which tests do you use on chain cables?
Gauging and a visual examination of every shot, with magnetic particle, ultrasonic or dye penetrant tests where the surveyor or the condition calls for them.
03Can you recover a lost anchor?
Yes. Our divers and boats search for and recover lost anchors and chain in Brazilian anchorages, 24 hours a day, with the Harbour Master’s clearance.
04Do you supply new anchors and chain?
We supply certified stockless, Delta and Bruce anchors, stud-link chain and fittings such as shackles, swivels and joining links, each with its material certificate.
05Will class accept a repaired link or anchor?
Repairs follow approved procedures and are reported to the vessel’s class society, whose surveyor decides on acceptance. Where wear or cracks exceed the limits, replacement is the only option.
06Can I work out the equipment my ship needs?
Yes. Our anchor and chain tool gives the equipment number, the anchors and the cable the rule requires, with weights and loads, for a supply, a survey or a repair.
General Ship Repair
Open the line01Which repairs can be done without a drydock?
Crane and cargo gear repairs, steel renewal in holds and on deck, leak sealing, piping, thickness gauging and many temporary repairs. Work below the waterline is coordinated with our underwater team.
02Do you measure steel thickness for class?
Yes. Ultrasonic thickness gauging is carried out with calibrated equipment accepted by class, and the results are reported location by location.
03Can you carry out repairs at anchorage?
Yes. Riding squads work at berth or at anchor, with materials and equipment brought out by boat, within the port’s rules for hot work.
04How quickly can a riding squad be on board?
Squads are mobilised 24 hours a day; the time to board depends on the port, the access by boat and the permits the work requires.
05Who approves the repair?
The vessel’s classification society. We plan the work with the surveyor, follow approved procedures and hand over the records needed for acceptance.
06Can I plan the job before asking for a quotation?
Yes. Our ship repair planner turns work packages into man-hours, crew, a schedule and the permits, and you can send the result with your request.
Shipping Agency
Open the line01What does a shipping agent do in Brazil?
The agent represents the vessel before customs, the Federal Police, the health and agriculture authorities, the port authority and the terminal, books pilots, tugs and mooring, arranges husbandry and records the call in the statement of facts.
02What is protective agency (OPA)?
If the port agent is the charterer’s nominee, the owner may appoint its own protective agent to look after its interests: we follow the call, check the costs and document delays and disputes.
03How do you keep port costs under control?
With an itemised PDA approved before arrival, quotes from suppliers and a final DA in which every item has its receipt and any difference from the estimate is explained.
04Can you arrange crew changes and cash to master?
Yes. Crew changes, visas, transport, hotels and medical care are arranged under the port and immigration requirements, and cash to master is delivered against signed receipts.
05How quickly is the final DA issued?
Within 48 hours of sailing, complete with the vouchers and receipts.
06Can you calculate laytime and demurrage?
Our team checks statements of facts and laytime for owners and charterers, and our free laytime calculator works out laytime used and demurrage or despatch from the C/P terms.
Contact/Operations hub · 24/7
Plan your next job in Brazil. Our operations hub replies 24/7.
Send the vessel, the port and the dates. We reply with a plan, a team and a timetable.
- Response
- 30–60 min
- Ports
- 12 · 04 Regions
- Operations hub
- Santos · 24/7
What to send
- 01The vessel and its IMO number
- 02The port, the berth or anchorage, and the dates
- 03The service, and what the work involves
- 04A plan from one of our tools, if you made one